Plastics Advanced Engineering Plastics

PPE(PPO)

Polyphenylenether

Product Description:

Light gray

Polyphenylenether belongs to the group of the amorphous materials and can be used in temperatures ranging from -50 °C to +105 °C. PPO exhibits a high impact strength and a very high dimensional stability. The electrical properties will not be influenced by the surrounding frequencies and therefore can be used in a lot of applications in electrical engineering.

Advantage
★high dimensional stability
★low tendency to creep
★high thermal stability
★high impact strength
★good electrical characteristics over a far frequency range
★high resistance to hydrolysis
★self-extinguishing

Mechanical properties:

Tensile strength resistance Elongation Rate Resistance Coefficient Notched Impact Strength Bending Strength Bending coefficient Bending coefficient Compressive strength Compressibility Friction coefficient
62 24 2414 188 100 2552 -- -- 0.40

Material properties:

Heat deflection temperature
(0.45Mpa)
Heat distortion temperature
(1.8Mpa)
Short-term maximum temperature Continuous use temperature Thermal conductivity Coefficients of linear expansion Combustion
136 124 205 105-50 0.18 5.93 HB

Properties of Electricity:

Volume resistivity Surface Resistance Dielectric Strength Density Rockwell hardness Shao D hardness Water absorption
10E17 10E15 19.68 1.06 -- 89 0.06

Product Type / Size [mm]
Loading....

Product Type Size  
Board
Stick