Plastics Advanced Engineering Plastics

PPE(PPO)-GF30

Polyphenylenether

Product Description:

Ivory

Reinforced with 30% glass fibre.Polyphenylenether belongs to the group of the amorphous materials and can be used in temperatures ranging from -50 °C to +110 °C. PPO exhibits a high impact strength and a very high dimensional stability. The electrical properties will not be influenced by the surrounding frequencies and therefore can be used in a lot of applications in electrical engineering.

Advantage
★high dimensional stability
★low tendency to creep
★high thermal stability
★high impact strength
★good electrical characteristics over a far frequency range 
★high resistance to hydrolysis
★self-extinguishing

Mechanical properties:

Tensile strength resistance Elongation Rate Resistance Coefficient Notched Impact Strength Bending Strength Bending coefficient Bending coefficient Compressive strength Compressibility Friction coefficient
106 6 6900 108 151 5728 -- -- 0.26

Material properties:

Heat deflection temperature
(0.45Mpa)
Heat distortion temperature
(1.8Mpa)
Short-term maximum temperature Continuous use temperature Thermal conductivity Coefficients of linear expansion Combustion
138 132 205 111/-50 0.24 2.52 V-1

Properties of Electricity:

Volume resistivity Surface Resistance Dielectric Strength Density Rockwell hardness Shao D hardness Water absorption
10E15 10E13 23.61 1.28 -- 86 0.07

Product Type / Size [mm]
Loading....

Product Type Size  
Board
Stick