Plastics Advanced Engineering Plastics

PEI-GF30

Polyetherimide

Product Description:

Obscure Dull Yellow

Ultem 2300, By order ULTEM® PEI with 30% glass fibre reinforced.

Mechanical properties:

Tensile strength resistance Elongation Rate Resistance Coefficient Notched Impact Strength Bending Strength Bending coefficient Bending coefficient Compressive strength Compressibility Friction coefficient
170 14 8969 86 227 8969 213 6471 --

Material properties:

Heat deflection temperature
(0.45Mpa)
Heat distortion temperature
(1.8Mpa)
Short-term maximum temperature Continuous use temperature Thermal conductivity Coefficients of linear expansion Combustion
211 211 204 180 0.23 1.97 V-0

Properties of Electricity:

Volume resistivity Surface Resistance Dielectric Strength Density Rockwell hardness Shao D hardness Water absorption
3*10E16 -- 24.8 1.51 -- 86 0.16

Product Type / Size [mm]
Loading....

Product Type Size  
Board
Stick
Pipe