Plastics Advanced Engineering Plastics

PEEK-MT(醫療級)

Product Description:

Black

Hydrolysis-resistant, autoclavable semi-finished product with approval for medical technology. PEEK can be used at very high temperatures (+260℃) and it shows an extraordinary mechanical strength, toughness, hardness, flexural strength, torsional strength. PEEK exhibits excellent chemical resistance, very good dielectric properties up to +260℃ and a very good resistance to all kind of radiation. Importantly it is self-extinguishing according to UL94.

Mechanical properties:

Tensile strength resistance Elongation Rate Resistance Coefficient Notched Impact Strength Bending Strength Bending coefficient Bending coefficient Compressive strength Compressibility Friction coefficient
94 18 3000 O.B. -- 4100 -- -- 0.33

Material properties:

Heat deflection temperature
(0.45Mpa)
Heat distortion temperature
(1.8Mpa)
Short-term maximum temperature Continuous use temperature Thermal conductivity Coefficients of linear expansion Combustion
183 140 300 258 0.24 5 V-0

Properties of Electricity:

Volume resistivity Surface Resistance Dielectric Strength Density Rockwell hardness Shao D hardness Water absorption
10E16 10E15 22 1.30 -- -- 0.52

Product Type / Size [mm]
Loading....

Product Type Size  
Board
Stick