Plastics Advanced Engineering Plastics

PEEK-TF(PTFE)

Polyetheretherketone,Add 10% Teflon

Product Description:

Very good sliding and friction properties, suitable for soft mating partners. Electrically insulating. PEEK can be used at very high temperatures (+260℃) and it shows an extraordinary mechanical strength, toughness, hardness, flexural strength, torsional strength. PEEK exhibits excellent chemical resistance, very good dielectric properties up to +260℃ and a very good resistance to all kind of radiation. Importantly it is self-extinguishing according to UL94.

Mechanical properties:

Tensile strength resistance Elongation Rate Resistance Coefficient Notched Impact Strength Bending Strength Bending coefficient Bending coefficient Compressive strength Compressibility Friction coefficient
79 4 3000 O.B. 86 5400 -- -- 0.12

Material properties:

Heat deflection temperature
(0.45Mpa)
Heat distortion temperature
(1.8Mpa)
Short-term maximum temperature Continuous use temperature Thermal conductivity Coefficients of linear expansion Combustion
292 276 300 258 0.23 -- V-0

Properties of Electricity:

Volume resistivity Surface Resistance Dielectric Strength Density Rockwell hardness Shao D hardness Water absorption
-- -- -- 1.35 -- -- 0.2

Product Type / Size [mm]
Loading....

Product Type Size  
Board
Stick