General Engineering

MC-Oil

Polyamide (nylon casting), and add oil.

Product Description:

Green/Yellow

MC+Oil, Ultralon, Caprolactam, Nylon 6 Cast Oil Filled, Simply put, this is a cast nylon with built-in oil lubrication. This oil-filler reduces friction by as much as 25% at the bearing interface, and can result in longer wear life than unfilled or moly-filled cast nylons.

Mechanical properties:

Tensile strength resistance Elongation Rate Resistance Coefficient Notched Impact Strength Bending Strength Bending coefficient Bending coefficient Compressive strength Compressibility Friction coefficient
60 24 2416 65 87 2244 98 -- 0.18

Material properties:

Heat deflection temperature
(0.45Mpa)
Heat distortion temperature
(1.8Mpa)
Short-term maximum temperature Continuous use temperature Thermal conductivity Coefficients of linear expansion Combustion
176 90 165 106/-20 0.22 7.3 HB

Properties of Electricity:

Volume resistivity Surface Resistance Dielectric Strength Density Rockwell hardness Shao D hardness Water absorption
>10E13 >10E12 20 1.15 -- 73 0.77

Product Type / Size [mm]
Loading....

Product Type Size  
Board
Stick